Phone: (03) 6264 1727 Fax: (03) 6264 2297
International: +61 3 6264 1727 Fax: +61 3 6264 2297
john@rowfit.com
Mail: PO Box 383
Huonville, Tasmania
Australia 7109
• Innovative design • Superior standards • Quality workmanship •

Riggers

We have developed a range of standard and wing riggers to comply with most boats and rowers , and we pride ourselves in our ability to customize our product to your specific needs.

 

ULTRAWINGS

ROWFIT winged riggers are built from aircraft grade aluminium using an elliptical section. This shape gives the rigger incredible stiffness which allows all the forces to be transferred between the rower and the water. When the foot stretcher is connected to the rigger this gives an even more positive feel.

Quad and Double Sculling riggers are made from the same section as the sweep rigger and are very stiff and do not require back arms.

ROWFIT has had a lot of success with sweep rigger at the Olympic Games, The Australian men's heavy and lightweight coxless fours rowed to a bronze and silver medal with these riggers.

Spend less time rigging your shells combine the ROWFIT QUICK RELEASE SYSTEM with ROWFIT ULTRAWINGS. Very popular with schools and clubs the ROWFIT QUICK RELEASE SYSTEM allow you to change riggers in a matter of seconds.

When ordering riggers please send us a completed spec sheet with your boats specific measurements.

sweep Ultrawing
Ultrawing Riggers
Ultrawing Rigger Spec Sheet

STANDARD Riggers

We also produce standard riggers. The standard rigger is of the simplest design using a 32mm diameter tube off the main shoulder and a 25mm diameter to the stern shoulder with a torsional stiffer parallel to the boat. Common uses are four to quad conversions, single scull and double scull, no back arms are required on sculling riggers

ROWFIT is always looking for lighter and a more responsive rigger stretcher systems that can be fitted to all Boat types.

Please don't hesitate to talk to us about new developments.

When ordering riggers please send us a completed spec sheet.

T2 Sculling Ultrawing
T2 Sculling ULTRAWING
Ultrawing Rigger Spec Sheet

T2 SCULLING ULTRAWINGS

The ROWFIT "T2" is a sculling ULTRAWINGS with an intergrated stretcher. The total weight for this system is 4.5kg (rigger, stretcher, shoe, pins and gates). A favorite of Elite Scullers. Excellent design, excellent results.

Please dont forget to send us the dimensions required. Send us the appropriate rigger spec sheet.

QUICK RELEASE PLATES

Quick Release Plates
New plastic quick release plates

Rowfit has developed a unique system which allows Riggers to be put on and taken off in a matter of seconds. Aluminium Quick Release plates are fixed to the gunwale of the boat and the rigger is fixed by camlock Quick release system.

*NEW*
Just released Plastic “Camlock Plates” This change of material from Aluminum offer;

  • Reduction in weight ( One third of the original)
  • 100% corrosion resistant
  • Insulation layer between boat and Rigger.
  • Reduced cost
  • Easy retro fitting to Rowfit riggers
• Rowing Rigging and Fittings ask Rowfit •